Hyundai Sonata: Jack and tools - If you have a flat tire - What to do in an emergencyHyundai Sonata: Jack and tools

The jack, jack handle, and wheel lug nut wrench are stored in the luggage compartment.

The jack, jack handle, and wheel lug nut wrench are stored in the luggage compartment. Pull up the luggage box cover to reach this equipment.

(1) Jack handle (2) Jack (3) Wheel lug nut wrench

Jacking instructions

The jack is provided for emergency tire changing only.

To prevent the jack from “rattling” while the vehicle is in motion, store it properly. Follow jacking instructions to reduce the possibility of personal injury.

WARNING - Changing tires

  • Never attempt vehicle repairs in the traffic lanes of a public road or highway.
  • Always move the vehicle completely off the road and onto the shoulder before trying to change a tire. The jack should be used on level firm ground. If you cannot find a firm, level place off the road, call a towing service company for assistance.
  • Be sure to use the correct front and rear jacking positions on the vehicle; never use the bumpers or any other part of the vehicle for jack support.
  • The vehicle can easily roll off the jack causing serious injury or death. No person should place any portion of their body under a vehicle that is supported only by a jack; use vehicle support stands.
  • Do not start or run the engine while the vehicle is on the jack.
  • Do not allow anyone to remain in the vehicle while it is on the jack.
  • Make sure any children present are in a secure place away from the road and from the vehicle to be raised with the jack.
    Removing and storing the spare tire
    Turn the tire hold-down wing bolt counterclockwise. Store the tire in the reverse order of removal. To prevent the spare tire and tools from “rattling” while the vehicle is in motion, stor ...

    See also:

    Description and Operation
    Description The SMART KEY system is a system that allows the user to access and operate a vehicle in a very convenient way. To access the vehicle, no traditional key or remote control unit i ...

    Intake Manifold. Repair procedures
    Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). Tightening tor ...

    Shift Lever. Repair procedures
    Removal 1. Remove the front console assembly.(Refer to "Interior" in BD group) 2. Remove the snap pin (A) and the clips (B). ...