Hyundai Sonata: MENU : My Music Mode
In My Music mode, press the key
to set the Repeat, Random, Information, Delete, Delete All, and Delete Selection
features.
Repeat
Press the key
► Set [ RPT] through the
TUNE knob or
key. Repeats the currently playing
song.
❈ Press RPT again to turn repeat off.
Random
Press the key
► Set [ RDM] through the
TUNE knob or
key.
Plays all songs within the currently playing folder in random order.
❈ Press RDM again to turn random off.
Information
Press the key Set [ Info] through
the
TUNE knob or
key. Displays information of the
current song.
❈ Press the key to turn off info
display.
Delete
Press the key Set [ Delete] through
the
TUNE knob or
key.
- Deletes currently playing file In the play screen, pressing delete will delete the currently playing song.
- Deletes file from list
➀ Select the file you wish to delete by using the
TUNE knob.
➁ Press the key and select the
delete menu to delete the selected file.
Delete All
Press the key Set [ Del.All] through
the
TUNE knob or
key. Deletes all songs of My Music.
Delete Selection
Press the key Set [ Del.Sel] through
the
TUNE knob or
key. Songs within My Music are selected
and deleted.
➀ Select the songs you wish to delete from the list.
➁ After selecting, press the key
and select the delete menu.
AUX
AUX is used to play external MEDIA currently connected with the AUX terminal. AUX mode will automatically start when an external device is connected to the AUX terminal.
If an external device is connected, you can also press the
key to change to AUX mode.
❈ AUX mode cannot be started unless there is an external device connected to the AUX terminal.
MENU : iPod
In iPod mode, press the key to
set the Repeat, Album Random, All Random, and Information features.
Repeat
Press the key Set [1 RPT] through
the TUNE knob or
key to repeat the current song. ...
Care of disc
If the temperature inside the car is too high, open the car windows to ventilate
before using the system.
It is illegal to copy and use MP3/WMA files without permission. Use CDs
that are cr ...
See also:
Fob Holder. Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the floor console.
(Refer to the BD group - "Console")
...
Rail Pressure Sensor (RPS). Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine
speed. ...
Repair procedures - Revised
Fuel Pressure Test
1.
Release the residual pressure in fuel line (Refer to “Release
Residual Pressure in Fuel Line” in this group).
...