Hyundai Sonata: Restrictions in handling keys - Keys - Features of your vehicleHyundai Sonata: Restrictions in handling keys

When leaving keys with parking lot and valet attendants, the following procedures will ensure that your vehicle’s trunk and glove box compartment can only be opened with the master key.

Lock

When leaving the key with a parking lot attendant or valet, perform the following and leave the sub key with the attendant. The sub key can start the engine and operate door locks only.

Trunk

Trunk

1. Open the trunk lid.
2. Set the trunk lid control switch to LOCK position (3. Close the trunk lid.).
3. Close the trunk lid.

Glove box

Close and lock the glove box using the master key.

Lock release

Trunk

1. Open the trunk lid with the master key.
2. Set the trunk lid control switch to UNLOCK position (3. Close the trunk lid.).
3. Close the trunk lid.

In this position the trunk will open with the trunk lid release button or transmitter. The trunk can never be opened with the sub key.

Glove box

Unlock the glove box using the mechanical key.

    Key operations
    (1) Master key (M) Used to start the engine, lock and unlock the doors, lock and unlock the glove box, and open the trunk. (2) Sub key (S) Used only to start the engine and lock and unlock the do ...

    Immobilizer system
    Your vehicle is equipped with an electronic engine immobilizer system to reduce the risk of unauthorized vehicle use. Your immobilizer system is comprised of a small transponder in the ignition key ...

    See also:

    Armed stage
    Using the smart key Park the vehicle and stop the engine. Arm the system as described below. 1.Turn off the engine. 2.Make sure that all doors, the engine hood and trunk lid are closed and latched. ...

    EBD(Electronic Brake-force Distribution). Description and Operation
    Operation The EBD system (Electronic Brake force Distribution) as a sub-system of the ABS system is to control the maximum braking effectiveness by the rear wheels. It further utilizes ...

    Repair procedures
    On-vehicle Inspection Spark Test 1. Disconnect the ignition coil connectors (A). 2. Remove the ignition coils (A). ...