Hyundai Sonata: TPMS (Tire Pressure Monitoring System) malfunction indicator - Tire pressure monitoring system (TPMS) - What to do in an emergencyHyundai Sonata: TPMS (Tire Pressure Monitoring System) malfunction indicator

The TPMS malfunction indicator will illuminate after it blinks for approximately

The TPMS malfunction indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tire Pressure Monitoring System. If the system is able to correctly detect an under inflation warning at the same time as system failure then it will illuminate the TPMS malfunction indicator.

Have the system checked by an authorized HYUNDAI dealer as soon as possible to determine the cause of the problem.

CAUTION

  • The TPMS malfunction indicator may be illuminated if the vehicle is moving around electric power supply cables or radios transmitter such as at police stations, government and public offices, broadcasting stations, military installations, airports, or transmitting towers, etc. This can interfere with normal operation of the Tire Pressure Monitoring System (TPMS).
  • The TPMS malfunction indicator may illuminate if snow chains or some separately purchased devices such as notebook computers, mobile charger, remote starter, navigation etc. are used in the vehicle. This can interfere with normal operation of the Tire Pressure Monitoring System (TPMS).
    Low tire pressure telltale
    When the tire pressure monitoring system warning indicator is illuminated, one or more of your tires is significantly under-inflated. If the telltale illuminates, immediately reduce your speed, a ...

    Changing a tire with TPMS
    If you have a flat tire, the Low Tire Pressure will come on. Have the flat tire repaired by an authorized HYUNDAI dealer as soon as possible or replace the flat tire with the spare tire. CAUTION ...

    See also:

    Air intake control
    Type A Type B This is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air po ...

    Overhead Console Lamp. Schematic Diagrams
    Circuit Diagram ...

    Inhibiter Switch. Repair procedures
    Removal 1. Set room side lever and T/M side lever to "N" position. 2. Remove the battery and the battery tray. (Refer to &q ...