Automatic Transaxle. Repair procedures

Removal 1. Remove the following items; A. Air duct (A) and engine cover (B). (Refer to "Intake and Exhaust system" in EM group. ...

Components and Components Location

Component Location 1. Air breather hose 2. Oil level plug 3. Valve body assembly 4. Oil temperature sensor 5. Solenoid valve 6. Valve body cover 7. Inhibitor swit ...

See also:

Front Washer Motor. Repair procedures
Inspection 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. ...

Rear Upper Arm. Repair procedures
Removal 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...

Rail Pressure Sensor (RPS). Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...