Seat Belt Buckle Switch (BS). Description and Operation

Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status ...

Seat Belt Buckle Switch (BS). Repair procedures

Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat asse ...

See also:

Front Hub / Knuckle. Components and Components Location - Revised
Components 1. Split pin 2. Castle nut 3. Brake disc 4. Hub 5. Wheel bearing 6. Snap ring 7. Dust cover 8. Knuckle 9. Drive shaft Compo ...

Front Impact Sensor (FIS) Components and Components Location
Components ...

Rear Assist Arm. Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...